Mobile Photography Studio

Continuing our interest in creating Animal Situations that work in conjunction with our MyNaturewatch Camera, we assembled a structure that incorporates a camera, a bird feeder and a white studio background, all suspended from a hanging mobile. The fixed relationship between the camera and the Feeder creates really detailed shots of birds landing and eating seed. What we’ve found so far is that white background also helps to eliminate false positives as there’s less likelihood of movement other than the birds themselves.

The Mobile Studio is built from lengths of pine wood, rope and cable-ties, plus a standard MyNaturewatch Camera. Creating a suspended mobile enables it to be tree mounted and (so far) completely squirrel proof. The following footage shows afternoon feedings by Robins and Blue Tits on the Goldsmiths Campus.

Wildlife Theatre

Experience your local wildlife afresh with scene setting ideas such as this Wildlife Theatre. There is a certain integrity to witnessing and photographing animals in their ‘natural’ habitat, however it doesn’t do any harm to create destinations and scenarios that cast new light on your local critters.

Here we’ve created a simple Theatre construction from 4 sheets of modelling ply-wood glued together with a few off-cuts of pine wood. Now that we have a basic Theatre Sets we’re thinking about furniture and props that will lend a certain sense of drama to the proceedings. So far we have a mini cloud and an Enzo Mari Autoprogettazione chair. Stay tuned for more theatrics…

Super Simple BottleCam

With our DIY camera casings we put a lot of thought into creating designs that are highly performative yet easy to make. To ensure they are properly waterproof, animal proof and generally fit for the great outdoors they often involve getting your hands on a drill or a glue gun, and acquiring a few parts from a few places.

It occurred to us that there might be a companion case that used even fewer components and processes. Introducing the BottleCam to our community of users offers a solution that requires virtually no tools what-so-ever. If you have an empty bottle (tick) some scissors (tick) some tape (tick) and a pen (tick) you can make one right now.

The BottleCam unfortunately won’t last long on a rainy day but offers a quick and ultra simple entry level case to get you started with the simplest of ingredients.

  1. You will need a working Daylight Camera, a plastic bottle, a pen, electrical tape and a pair of scissors.

  2. Firstly mark and cut the bottle into three, with a slimmer middle section and equal sized top and base sections.

  3. Mark and cut a seam 3/4 of the way down the base section and all the way through the middle section.

  4. Mark and cut 10mm wide gaps half way into the bottom and top sections. On the bottom section this gap should be on the opposite side from the seam cut in step 3.

  5. Coil and tape the middle section into a cylinder.

  6. Tape this cylinder onto the top section, aligning it to the gap cut in step 4.

  7. Tape the Camera and Battery into the base section making sure the Camera lense points through the 10mm gap.

  8. Close the top section over the bottom section making sure the cylindrical lense cover aligns with the camera lense.

  9. You now have a working BottleCam. Enjoy!

Animal Animations

A simple and effective way to bring your animal photography to life is to create an animation. We’ve been experimenting with stitching short collections together to turn static moments into compelling micro-narratives.

There are many free online tools that convert images into animations. We’ve found particularly handy as a way to upload and compose images with basic size, speed and exporting options. As a general rule of thumb between 10 & 30 images is a good number and 350 milliseconds per image gives a satisfying speed. Exporting your animation as a GIF is normally effective, however if you wish to post your animal stories on Instagram then an MP4 format is recommended.

Why not give it a go! and keep us updated on social by using #mynaturewatch

Takeaway Cam

The key to the enjoyment of the MyNatuewatch Camera is its simple versatility. It can be used to film a huge vartiey of animals, in a multitude of situations, contained in all sorts of housings. Here we’ve been further exploring the potential to turn household recycling into a casing design based around the ubiquitous Takeaway carton. Following these simple steps will enable you to build your own...

  1. You will need a working Daylight Camera, a takeaway carton, a plastic bottle lid, a drill, a glue gun and last but not least a pen.

  2. Position your Camera Lense under the takeaway carton lid and mark a position for for a hole to be drilled.

  3. Drill a 10mm hole where marked and also through the centre of the bottle top lid. The plastic can crack easily so a tip for achieving a well drill holed is to start with a small 2mm diameter bit and gradually work up to the 10mm.

  4. Secure the bottle top lid to the takeaway carton lid with hot glue, making sure the two holes align.

  5. Tape the Daylight Camera onto the underside of the takeaway lid positioning the lense to match up with drilled hole.

  6. Close the lid and screw on the bottle top as a protective lense cover.

  7. You now have a working Takeaway Cam - enjoy using it to discover more about the animals in your area.

Designing for birds

For our next device we are working on a bird feeder that has RFID technology that can track birds bearing RFID tags. Part of our team has been dedicated to adapt existing birdfeeders to fit the hardware, which consists of a microcontroller, an RFID reader and a PCB inductance coil.

One of our main challenges has been to design a perch that will position the birds inside the reading distance of the coil. The birds need to land within a diameter of 42 mm above the coil, a few millimetres off and the reader will not detect them. The tricky task is to design a feeder that is inviting enough to attract the birds and at the same restricts the area where they land. 

For this purpose, we have been doing some traditional user trials by testing several 3d printed bird feeder adaptors, and the only way to get feedback from our feathered users is by capturing their visits with a Naturewatch camera. The pictures above show the different designs we have developed in use. So far we have managed to get blue tits and robins using the feeders, but we are still working on ways to get them to land in the right spot. 

As expected, squirrels have made an appearance in the hope of getting some food!

We will post more developments soon. Any suggestions or tips for designing for birds will be very welcome, please email us at 

Camouflage ideas

We have been receiving great pictures from the Naturewatch community showing the different setups people have built for their cameras. Amongst these pictures, we’ve seen some cameras that have been camouflaged using camo tape and army camo netting. We have been playing around with DIY ways to make fake foliage to hide the cameras in the wild. Here are some ideas if you would like to get crafty. 

Make your own foliage by taping green individual ‘leaves’ made out of cut-outs of print greenery. You can use images of bright green grass, paintings of landscapes or any pattern that can resemble forest camouflage. After printing different types of foliage in green card, we cut circles in different sizes. You can use a scalpel or circle cutter to do this or go freestyle to create irregular shapes. We then recreated foliage around the camera by taping the circles individually along the surface. 

After testing the camouflaged camera in our garden we noticed that the leaves are changing colour due to the season so we also made an autumn version of the foliage using red and yellow leaves.

If you would like to try this you can also use old magazines or card packaging with tones of the foliage you would like to recreate. This initial idea works as a temporary camouflage, for more permanent solutions we will experiment with other materials. 

Let us know if you have any ideas for camouflaging your Naturewatch kit by sending us your pictures to